How to Set Up Greenworks Pressure Washer: A Step-by-Step Guide

So you’ve just purchased a Greenworks pressure washer and you’re excited to put it to use. But before you start blasting away dirt and grime, you’ll need to set it up properly. Don’t worry, though – setting up your Greenworks pressure washer is a breeze, and I’m here to guide you through the process.

First things first, you’ll want to gather all the necessary tools and materials. Make sure you have a garden hose that’s long enough to reach your pressure washer, as well as an electrical outlet nearby. You’ll also need a suitable surface to place your pressure washer on, such as a level concrete pad or sturdy outdoor table.

Once you’ve got everything you need, it’s time to unpack your Greenworks pressure washer and familiarize yourself with its components. Take a look at the user manual that came with your machine to get a clear understanding of where everything goes. Next, you’ll want to connect the garden hose to the pressure washer.

Look for the water inlet on the machine, usually marked with an arrow or a label. Attach one end of the hose to this inlet, making sure it’s securely fastened. Then, connect the other end of the hose to your outdoor spigot, making sure it’s tightened properly.

Now it’s time to connect the power cord. Locate the power cord on your pressure washer and find a nearby electrical outlet. Make sure the outlet is grounded and the cord is not damaged.

Plug the cord into the outlet, and you’re ready to go. Before you start using your pressure washer, it’s important to prime the pump. This is a simple process that involves running water through the machine to remove any air bubbles and ensure a smooth flow.

Introduction

Are you looking to set up your new Greenworks pressure washer but not sure where to start? Don’t worry, I’ve got you covered. Setting up a Greenworks pressure washer is easy and straightforward. Here’s a simple guide to help you get started.

First, find a stable and flat surface to place your pressure washer on. Make sure it’s close to a water source and has access to an electrical outlet. Next, connect the high-pressure hose to the pressure washer and tighten it securely.

Then, attach the spray gun to the other end of the hose and lock it in place. Before connecting the garden hose, make sure to remove any dirt or debris from the strainer filter. Once that’s done, connect the garden hose to the water inlet on the pressure washer and tighten it.

Now, plug in the power cord into a grounded outlet and turn on the water supply. Finally, squeeze the trigger on the spray gun to release any air from the system. And voila, your Greenworks pressure washer is now set up and ready to use!

Why Choose Greenworks Pressure Washer

Greenworks Pressure Washer, a leading brand in outdoor power equipment, is the perfect choice for all your cleaning needs. Whether you’re looking to give your patio a new lease on life or tackle stubborn dirt and grime on your car, Greenworks has got you covered. With their range of pressure washers, you can easily and effectively clean any surface with ease.

But what sets Greenworks apart from other brands? Let’s take a closer look at why choosing a Greenworks pressure washer is a no-brainer.

Unpacking and Checking Contents

So, you’ve just unpacked your brand new Greenworks pressure washer and you’re ready to get started on your cleaning projects. But where do you begin? Don’t worry, setting up your Greenworks pressure washer is a breeze! First, check the contents of the package to ensure that everything is included. You should have the pressure washer unit itself, a spray gun, a high-pressure hose, nozzle tips, and an instruction manual.

Take a moment to familiarize yourself with all of the components and make sure everything is in good condition. Next, assemble your pressure washer. Start by attaching the high-pressure hose to the unit and tighten it securely.

Then, attach the spray gun to the other end of the hose and tighten that as well. Make sure all connections are snug to prevent any leaks or loss of pressure. Once your pressure washer is assembled, it’s time to connect it to a water source.

You’ll need access to a water supply with a garden hose connection. Attach your garden hose to the water inlet on the pressure washer and tighten it firmly. Turn on the water supply and allow it to flow through the pressure washer.

This will help remove any air from the system and ensure smooth operation. Finally, it’s time to start using your Greenworks pressure washer. Familiarize yourself with the different nozzle tips that came with the unit.

Each nozzle tip provides a different spray pattern and pressure level, so choose the one that best suits your cleaning task. Simply insert the desired nozzle tip into the spray gun and ensure it is secure. You’re now ready to tackle your cleaning projects with your brand new Greenworks pressure washer!

Inspecting the Package

“When you receive a package in the mail, the excitement of what’s inside can be almost overwhelming. But before you tear into it, it’s important to take a moment to inspect the package and check its contents. This step is crucial for a few reasons.

First, it ensures that the package hasn’t been tampered with or damaged during transit. Second, it allows you to determine if everything you were expecting is actually there. And finally, it provides an opportunity to assess the overall condition of the items inside.

Think of it like unwrapping a present on Christmas morning. You wouldn’t just rip off the paper without taking a moment to appreciate the wrapping and admire the beautiful bow, would you? So, before you dive headfirst into your package, take a breath, slow down, and inspect it carefully. You’ll be glad you did.

“

Checking for Missing Parts

unpacking and checking contents, missing parts

Assembling the Pressure Washer

Setting up a Greenworks pressure washer is a straightforward process that can be done in just a few steps. Once you have assembled all the necessary tools and materials, you can begin by attaching the hose to the pressure washer. Make sure to tighten the connection securely to prevent any leaks.

Next, connect the other end of the hose to the spray gun by twisting it onto the thread. Again, ensure that it is tightened properly to avoid any issues. Once the hose is in place, you can proceed to attach the nozzle tip to the spray gun.

Depending on the type of cleaning you need to do, you can choose from various nozzle tips with different spray patterns. Simply insert the nozzle tip into the spray gun and twist it until it is secure. Finally, connect the pressure washer to a power source and turn it on.

Your Greenworks pressure washer is now set up and ready to use! Remember to always follow the manufacturer’s instructions and take necessary safety precautions while using the pressure washer.

Connecting the Handle

pressure washer assembly, connecting the handle Assembling a pressure washer may seem like a daunting task, but with a little guidance, it can be a breeze. One crucial step in the process is connecting the handle. The handle is an essential component of the pressure washer as it provides stability and control when using the machine.

To connect the handle, locate the designated slots on the pressure washer body. These slots are usually found towards the top of the machine. Align the handle with the slots and carefully insert it.

Ensure that the handle is securely in place before proceeding. Once the handle is connected, you can tighten any screws or bolts that are provided to ensure a stable connection. Now you’re one step closer to having a fully assembled pressure washer!

Attaching the Gun

“pressure washer assembly” Attaching the Gun to the Pressure Washer Now that you’ve got all the parts for your pressure washer laid out in front of you, it’s time to start assembling it. The first step is attaching the gun to the pressure washer. This is an important step because without the gun, you won’t be able to control the flow of water and effectively clean your surfaces.

To attach the gun, you’ll first need to locate the gun inlet on the pressure washer. This is usually a threaded connection point where the gun will screw in. Once you’ve found it, take the gun and line up the threads with the inlet.

Then, simply twist the gun into place until it feels secure. It’s important to make sure the gun is properly attached to avoid any potential leaks or accidents during use. You want to make sure it’s tight enough so that it won’t come loose while you’re cleaning, but be careful not to overtighten as this could cause damage to the threads.

Once the gun is attached, you’re one step closer to having a fully functioning pressure washer. But before you start cleaning, be sure to check the connection again and give it a little tug to make sure it’s secure. You don’t want any surprises while you’re in the middle of your cleaning project.

So go ahead and attach that gun to your pressure washer and get ready to power wash your way to a cleaner, more beautiful space. With the gun securely in place, you’ll be able to control the water flow and tackle even the toughest dirt and grime. So go ahead, get your pressure washer assembled and start cleaning with confidence!

Attaching the Hose

Attaching the Hose to Your Pressure Washer: A Simple Step in Assembling Your Cleaning Machine Now that you’ve got the pressure washer of your dreams, it’s time to assemble it and bring its cleaning power to life! One of the first steps in putting together your pressure washer is attaching the hose. This may seem like a simple task, but it’s an essential one that can make or break your cleaning experience. Before attaching the hose, it’s important to make sure you have the right length and type of hose for your pressure washer.

The hose should have a high pressure rating and be able to handle the water flow from your machine. It’s also crucial to check the fittings on both ends of the hose to ensure they match the connections on your pressure washer. To attach the hose, start by locating the inlet port on the body of your pressure washer.

This is where the water will enter the machine. Depending on the model, the inlet port may be located on the front, back, or side of the machine. Once you’ve found it, simply insert the end of the hose into the inlet port and twist it clockwise until it is securely fastened.

You’ll want to make sure the hose is tightly fitted to prevent any leaks or loss of pressure during operation. Give it a gentle tug to make sure it’s secure. If it feels loose or wobbly, try twisting it a bit more until it feels snug.

Once the hose is properly attached, you’re one step closer to enjoying the powerful cleaning capabilities of your pressure washer. But before you start spraying, it’s important to remember a few safety precautions. Always wear protective eyewear and gloves when using your pressure washer, and be mindful of the water pressure as it can cause injury if not used correctly.

With the hose securely attached, you’re ready to tackle any cleaning task that comes your way. From blasting away dirt and grime from your patio to giving your car a sparkling finish, your pressure washer will provide you with the cleaning power you need. So get out there and make your outdoor spaces shine!

Installing the Nozzle Tips

installing nozzle tips. When it comes to assembling your pressure washer, one crucial step is installing the nozzle tips. These tips are what determine the angle and intensity of the water spray, so it’s important to choose the right one for your cleaning needs.

First, make sure your pressure washer is turned off and the trigger is locked before you begin. Then, simply twist off the old nozzle tip from the spray wand and replace it with the desired new one. It’s as easy as screwing in a lightbulb! Remember to choose a nozzle tip that matches the cleaning task at hand.

For example, if you’re cleaning a delicate surface like a car, you’ll want a nozzle tip with a wider spray pattern and lower pressure. On the other hand, if you’re tackling tough grime on concrete, a narrower spray pattern and higher pressure will get the job done. Don’t forget to test out the new nozzle tip before you start cleaning to ensure it’s working properly.

With the right nozzle tip, your pressure washer will be ready to tackle any cleaning task with ease.

Attaching the Soap Applicator

Attaching the Soap Applicator: Assembling the Pressure Washer Now that you’ve got your brand new pressure washer all set up and ready to go, it’s time to take things to the next level. One of the great features of many pressure washers is the ability to attach a soap applicator. This allows you to easily apply soap or detergent to surfaces before blasting them clean with the high-pressure water.

It’s like giving your pressure washer superpowers! Attaching the soap applicator is a breeze. Most pressure washers come with a soap applicator nozzle that easily screws onto the end of the spray wand. Simply remove the regular spray tip (usually a colored nozzle) from the end of the wand and replace it with the soap applicator nozzle.

Make sure it is screwed on tightly to prevent any leaks during use. Once the soap applicator nozzle is attached, you’re ready to start using your pressure washer to tackle even the toughest dirt and grime. Just fill the applicator attachment with the appropriate soap or detergent, and you’re good to go.

Some pressure washers even have a feature that allows you to adjust the amount of soap that is mixed with the water, giving you even more control over the cleaning process. Using the soap applicator is a game-changer when it comes to cleaning tasks. It allows the soap or detergent to penetrate deep into the surface, loosening dirt and grime for easier removal.

Whether you’re cleaning your car, outdoor furniture, or siding, the soap applicator will make your pressure washer even more effective. So don’t just settle for a regular pressure washer. Take advantage of the soap applicator feature to make your cleaning tasks a breeze.

With this simple attachment, you’ll be able to tackle any cleaning job with ease and efficiency. So go ahead, attach that soap applicator and let your pressure washer work its magic!

Setting Up the Water Supply

If you’ve just purchased a Greenworks pressure washer and are excited to get started on your cleaning projects, the first step is to set up the water supply. This process is fairly straightforward and doesn’t require any special tools or equipment. To begin, you’ll want to locate an outdoor water source such as a spigot or garden hose.

Make sure the water supply is turned off before connecting the hose to the pressure washer. Next, attach the other end of the hose to the water inlet valve on the pressure washer. Ensure that the connection is tight to prevent any leaks.

Finally, turn on the water supply and check for any leaks. If everything looks good, you’re all set to start using your Greenworks pressure washer!

Connecting the Water Source

Setting up the water supply for your garden is a crucial step in ensuring your plants thrive and flourish. Before connecting the water source, it’s important to consider a few factors. First, determine the location of the water source and how far it is from your garden.

This will help you determine the length of hose or piping you will need. Next, consider the water pressure and flow rate of the source. You want to ensure that your garden receives enough water to meet its needs.

If the pressure is too low, you may need to install a water pump to increase the flow. Finally, make sure you have the necessary tools and materials to connect the water source to your garden, such as a hose connector or pipe fittings. By taking the time to set up your water supply correctly, you can provide your plants with the essential moisture they need to thrive.

With a reliable water source, your garden will be well on its way to success.

Checking for Proper Water Flow

water flow, setting up, water supply

Connecting to Power

Setting up a Greenworks pressure washer is a fairly simple process that requires just a few steps. One of the first things you’ll need to do is connect the pressure washer to a power source. Most Greenworks pressure washers are electric, so they need to be plugged into an electrical outlet.

Look for the power cord on the pressure washer and locate a nearby outlet. Make sure the outlet is grounded and can handle the power requirements of the pressure washer. Once you’ve found a suitable outlet, plug in the power cord securely.

It’s important to note that some pressure washers may have a built-in safety feature that requires you to press a reset button after plugging in the power cord. If this is the case, simply locate the reset button and press it before continuing with the setup process.

Choosing the Right Power Source

power source, connecting to power

Running the Power Cord

power cord, connecting to power

Plugging In and Turning On

When it comes to setting up your new device, one of the first things you’ll need to do is connect it to a power source. This is a crucial step in getting your device up and running, as without power, it’s essentially useless. Depending on the type of device you have, there are different options for connecting to power.

For smaller devices like smartphones and tablets, you’ll typically use a USB cable to plug into a wall adapter or computer. For larger devices like computers and TVs, you may need to connect to a power outlet directly with a power cord. It’s important to make sure you’re using the correct power source for your device to avoid any damage or malfunctions.

Once you’ve connected your device to power, you can then turn it on and start using it. So, before you start using your new device, make sure you’ve got it connected to power and ready to go.

Operating the Pressure Washer

So, you’ve got yourself a brand new Greenworks pressure washer and you’re ready to put it to use. Setting up your pressure washer is the first step to unlocking its cleaning power. Let’s walk through the process together, shall we? First things first, find a suitable location for your pressure washer.

Ideally, you want a flat surface that can handle the weight of the machine. Once you’ve found the perfect spot, it’s time to connect the water supply. Attach your garden hose to the water inlet on the pressure washer and make sure it’s tightly secured.

Next, it’s time to connect the spray gun. Check that the trigger safety lock is engaged before attaching the spray gun to the high-pressure hose. Once it’s securely attached, you can release the safety lock.

Now that everything is connected, it’s time to turn on the water supply. Make sure the water source is fully turned on and check for any leaks. If you spot a leak, tighten the connections until it stops.

Finally, it’s time to start the pressure washer. Plug it into a grounded electrical outlet and flip the switch to the “on” position. You should hear the motor start to hum.

Give it a few moments to build up pressure before squeezing the trigger on the spray gun. Now you’re ready to tackle those dirty surfaces! Just remember to start with a low-pressure setting and gradually increase the pressure as needed. And don’t forget to wear protective gear, like safety goggles and gloves, to keep yourself safe during operation.

Understanding the Control Panel

The control panel is an essential part of operating a pressure washer. It allows you to adjust and control various settings to ensure optimal performance. One of the key features on the control panel is the on/off switch, which allows you to start and stop the machine easily.

This is important because it helps to conserve energy and prolong the life of the pressure washer. Additionally, the control panel typically includes a pressure adjustment knob or dial, which allows you to control the amount of pressure produced by the machine. This is helpful because different cleaning tasks require different levels of pressure.

For example, you might need more pressure to remove stubborn dirt and grime from a concrete surface, but less pressure to clean delicate surfaces like wood or glass. The control panel may also include other settings, such as a detergent dispenser or a hot water option, depending on the model of pressure washer. Overall, understanding and using the control panel properly is crucial for operating a pressure washer effectively and efficiently.

Starting and Stopping the Pressure Washer

Starting and Stopping the Pressure Washer Operating a pressure washer may seem daunting at first, but with a few simple steps, you’ll be able to start and stop it like a pro. When it comes to starting the pressure washer, the first thing you’ll want to do is ensure that the water source is connected and turned on. This is vital because without water, the pump can get damaged.

Once you’ve done that, make sure the pressure washer’s fuel tank is filled with gas or oil – whichever the manufacturer recommends. After that, all you need to do is set the choke to the starting position and pull the cord to start the engine. As for stopping the pressure washer, it’s just as straightforward.

Simply turn off the water supply, and then allow the pressure washer to run for a few minutes without any load. This helps to cool down the engine. Finally, turn off the engine and disconnect the spark plug wire for added safety.

Starting and stopping a pressure washer really is as easy as a few simple steps, allowing you to get your cleaning tasks done efficiently and effectively.

Adjusting the Pressure

pressure washer, operating the pressure washer, adjusting the pressure. Operating a pressure washer may seem like a daunting task, but with a little know-how, it can be a breeze. One of the key elements to consider when using a pressure washer is adjusting the pressure.

Different surfaces and cleaning tasks require different levels of pressure, so it’s important to know how to make the necessary adjustments. Thankfully, most pressure washers come with a pressure control knob that allows you to easily increase or decrease the pressure output. If you’re washing a delicate surface like a car or a window, you’ll want to lower the pressure to avoid causing any damage.

On the other hand, if you’re tackling a tough outdoor cleaning job like removing old paint from a fence, you’ll want to crank up the pressure to get the job done efficiently. So, you see, adjusting the pressure is like finding the right tool for the right job – it ensures that you get optimal cleaning results without causing any unnecessary damage. Now that you know how to adjust the pressure, you’re well on your way to becoming a pressure washing pro!

Using the Soap Applicator

Pressure washer, soap applicator, operating So you have your pressure washer all set up and ready to go, but now you’re wondering how to use the soap applicator? Don’t worry, it’s actually quite simple! Operating the soap applicator on a pressure washer is a straightforward process that can help you achieve a deeper cleaning on your surfaces. First, make sure that you have the correct soap or detergent solution for your specific pressure washer. Different models may require different types of soap, so it’s important to read the manufacturer’s instructions or consult the user manual to ensure you’re using the appropriate product.

Next, locate the soap applicator on your pressure washer. This is typically a separate nozzle or attachment that is specifically designed for dispensing soap. It may be labeled or color-coded for easy identification.

Once you’ve found the soap applicator, attach it to the pressure washer gun or lance. This is usually done by twisting or snapping it into place. Make sure it is securely attached to avoid leakage or accidents during use.

Now, it’s time to prepare the soap solution. Depending on your pressure washer and soap applicator, different ratios may be required. Again, consult the manufacturer’s instructions for specific guidance on how much soap and water to mix.

Once you have your soap solution ready, turn on the pressure washer and adjust it to the desired pressure setting. Point the soap applicator towards the surface you wish to clean, making sure to maintain a safe distance to avoid potential damage. Squeeze the trigger on the pressure washer gun to activate the soap applicator.

As you do this, you should see the soap solution being dispensed onto the surface. Move the soap applicator back and forth across the area you’re cleaning to ensure even coverage. After applying the soap, let it sit on the surface for a few minutes to allow it to break down dirt and grime.

Maintenance and Storage

Setting up a Greenworks pressure washer is a relatively simple process that can be done by anyone. To begin, assemble the pressure washer by following the instructions provided in the manual. Make sure all the parts are securely attached.

Next, connect the water source to the pressure washer using a standard garden hose. Ensure that the water inlet filter is in place to prevent any debris from entering the washer. Once connected, turn on the water supply and check for any leaks.

Now, connect the pressure hose to the pump and the spray gun to the other end of the hose. Finally, turn on the pressure washer and squeeze the trigger on the spray gun to release any trapped air and allow water to flow through the system. It’s important to note that before turning on the pressure washer, you should be familiar with the instruction manual and safety guidelines to ensure proper usage and avoid any accidents.

Follow these simple steps, and you’ll be ready to tackle your cleaning projects with ease.

Cleaning the Pressure Washer

pressure washer, cleaning, maintenance, storage

Preventing Clogs and Blockages

One important aspect of preventing clogs and blockages in your plumbing system is regular maintenance and proper storage practices. By taking the time to maintain your pipes and drains, you can prevent buildup and keep everything flowing smoothly. This includes cleaning out your drains on a regular basis, using drain screens to catch debris, and avoiding pouring grease or other substances down the drain that can solidify and cause blockages.

It’s also important to properly store items that can potentially cause clogs, such as hair and food particles. By being proactive in your maintenance and storage habits, you can help prevent clogs and blockages from occurring in the first place, saving you time, money, and frustration in the long run.

Draining and Storing the Pressure Washer

draining and storing the pressure washer, maintenance and storage When it comes to keeping your pressure washer in top shape, proper maintenance and storage are key. One important step in this process is draining and storing the pressure washer correctly. This task may seem daunting, but it’s actually quite simple to do.

By following a few easy steps, you can ensure that your pressure washer is ready to go the next time you need it. First, it’s important to drain any remaining water from the pressure washer. This is crucial to prevent any potential damage caused by freezing temperatures during storage.

Start by turning off the pressure washer and disconnecting it from the power source. Then, engage the trigger gun to release any built-up pressure. Next, remove the garden hose from the water inlet and let any remaining water drain out.

You can tip the pressure washer on its side to help facilitate the draining process. Once the pressure washer is drained, it’s time to store it properly. Make sure to clean the unit thoroughly, removing any dirt, grime, or debris.

Pay special attention to the nozzle, as any blockages can cause damage to the unit. Once the pressure washer is clean, store it in a clean, dry area. It’s best to keep it in a protected space, such as a garage or shed, to prevent exposure to the elements.

By following these simple steps, you can ensure that your pressure washer stays in great shape for years to come. Proper maintenance and storage are essential for keeping this powerful tool performing at its best. So take the time to drain and store your pressure washer correctly, and you’ll be ready for any cleaning job that comes your way.

Conclusion

So there you have it, the ultimate guide to setting up your Greenworks pressure washer. With just a few simple steps, you can unleash the power of a hundred thirsty ducks, and say goodbye to dirt and grime with the force of a thousand sneezing unicorns. Remember, safety is key when operating any pressure washer, so always wear protective gear and keep a safe distance from the cleaning area.

And if any unexpected incidents occur, just remember that even the mightiest of machines may occasionally hiccup like a ticklish penguin. Now go forth, my brave DIY warriors, armed with this knowledge and a Greenworks pressure washer, and conquer the battle against dirt and grime. Happy cleaning!”

Enjoying the Benefits of a Greenworks Pressure Washer

When it comes to maintaining your Greenworks pressure washer, there are a few simple steps you can take to keep it running smoothly. First, make sure to check the oil levels regularly and add more if needed. This will help prevent any damage to the engine and ensure it continues to function properly.

Additionally, it’s important to clean the pressure washer after each use. Use a mild detergent and warm water to remove any dirt or grime that may have accumulated. This will not only keep your machine looking good but also help prevent clogs in the hose and nozzle.

Lastly, when storing your pressure washer, make sure to drain any remaining water from the system. This will prevent freezing during colder months and extend the life of your machine. By following these simple maintenance and storage tips, you can continue to enjoy the benefits of your Greenworks pressure washer for years to come.

FAQs

FAQs for “How to Set Up Greenworks Pressure Washer” 1. How do I assemble the Greenworks pressure washer? – The Greenworks pressure washer comes with a user manual that provides detailed instructions on assembly. Follow the step-by-step guide to set it up correctly. 2. What accessories are included with the Greenworks pressure washer? – The Greenworks pressure washer typically comes with a high-pressure hose, spray gun, wand, nozzles, and a detergent bottle. Make sure to check the product description or user manual to confirm the included accessories. 3. How do I connect the high-pressure hose to the Greenworks pressure washer? – To connect the high-pressure hose, locate the hose inlet on the pressure washer unit, remove the protective cap, and firmly push the end of the hose into the inlet until it clicks in place. Make sure it is securely connected before using the pressure washer. 4. What type of detergent should I use with the Greenworks pressure washer? – The Greenworks pressure washer is compatible with most pressure washer detergents. Follow the instructions provided in the user manual to determine the appropriate detergent and mixing ratio for your specific cleaning needs. 5. How do I start the Greenworks pressure washer? – Before starting the pressure washer, ensure that it is properly connected to a water source and all necessary connections are secure. Once ready, turn on the water supply, squeeze the trigger on the spray gun to release any air, and then pull the starter cord or press the start button as per the manufacturer’s instructions. 6. Can I adjust the pressure on the Greenworks pressure washer? – Yes, the Greenworks pressure washer typically allows you to adjust the pressure output by changing the nozzle or using a pressure regulator (if included). Consult the user manual to understand the available pressure settings and how to adjust them. 7. How do I clean and store the Greenworks pressure washer after use? – After each use, turn off the pressure washer and disconnect it from the power source. Release any pressure in the system by squeezing the trigger on the spray gun. Clean the unit and accessories with water, and if necessary, use a mild detergent. Allow them to dry thoroughly before storage, and store the pressure washer in a clean and dry place.