How to Connect Sun Joe Pressure Washer: A Comprehensive Guide

Have you recently purchased a Sun Joe pressure washer and are wondering how to get it set up and ready to use? Well, you’ve come to the right place! In this blog, we will walk you through the step-by-step process of connecting your Sun Joe pressure washer so that you can start tackling those outdoor cleaning tasks with ease. Connecting your Sun Joe pressure washer is a simple process that anyone can do. Think of it like connecting the pieces of a puzzle.

You have all the necessary components, and all you need to do is fit them together. First, locate the hose connector on your pressure washer. This is where you will attach the water supply hose.

It’s just like connecting a garden hose to a sprinkler – easy peasy! Next, attach the high-pressure hose to the pressure washer. This is the hose that will deliver the powerful streams of water necessary for cleaning. Again, think of it like connecting the pieces of a puzzle – it’s all about finding the right fit.

Once the high-pressure hose is securely attached, you will need to connect the spray wand. This is the part of the pressure washer that you will hold and maneuver while cleaning. It’s as simple as sliding the spray wand into place and locking it in.

Finally, plug in your pressure washer. Most Sun Joe pressure washers simply require you to plug them into a standard electrical outlet. Once plugged in, you’re ready to go! Now that you have successfully connected your Sun Joe pressure washer, you can start using it to tackle all of your outdoor cleaning tasks.

From washing your car to cleaning your patio furniture, this powerful tool will make quick work of even the toughest grime and dirt. So go ahead, get out there and start cleaning! With your newly connected Sun Joe pressure washer, your outdoor spaces will be sparkling clean in no time.

Introduction

Are you ready to tackle some tough cleaning tasks around your home? If so, a Sun Joe pressure washer can be a powerful tool to help you get the job done quickly and efficiently. But before you can start blasting away dirt and grime, you’ll need to know how to properly connect your pressure washer. Don’t worry, it’s actually quite simple! First, find a sturdy outdoor water source and connect the garden hose to it.

Next, attach the high-pressure hose to the pressure washer by screwing it on firmly. Be sure to check for any leaks or loose connections. Finally, attach the spray wand or nozzle to the end of the high-pressure hose, and you’re ready to start cleaning.

Just remember to follow all safety guidelines and precautions, and to always wear protective eyewear and gloves. With your Sun Joe pressure washer properly connected, you’ll be able to tackle even the toughest cleaning tasks with ease. So go ahead, unleash the power of your pressure washer and enjoy the satisfaction of a sparkling clean home.

Overview of Sun Joe Pressure Washer

Sun Joe pressure washer Introduction: When it comes to keeping your outdoor spaces looking clean and tidy, a pressure washer is a handy tool to have. One popular option on the market is the Sun Joe pressure washer. This versatile machine is designed to easily tackle a wide range of cleaning tasks, from removing dirt and grime from decks and driveways to washing cars and patio furniture.

With its powerful motor and high-pressure output, the Sun Joe pressure washer makes quick work of even the toughest cleaning jobs. In this blog post, we will take a closer look at the features and benefits of the Sun Joe pressure washer, and why it may be a great addition to your outdoor cleaning arsenal.

Importance of Proper Connection

Importance of Proper Connection Introduction In today’s fast-paced world, where technological advancements are the norm, proper connection has become more important than ever. Whether it’s a physical connection like wires and cables or a digital connection through Wi-Fi or Bluetooth, having a strong and reliable connection is crucial in various aspects of our lives. From staying connected with loved ones to conducting business operations, a proper connection can make all the difference.

In this blog, we will explore the significance of a proper connection and why it should not be taken for granted. So, let’s dive in and unravel the importance of maintaining a strong connection in our modern world.

Step 1: Familiarize Yourself with the Parts of the Pressure Washer

So, you’ve just purchased a Sun Joe pressure washer and you’re eager to get started on your outdoor cleaning projects. The first step in getting your pressure washer up and running is to familiarize yourself with its various parts. Sun Joe pressure washers typically consist of a motor, pump, water inlet, high-pressure hose, spray gun, and nozzle.

Knowing what each component does and how they all fit together will make the connection process much easier. Take a few minutes to read through the user manual and study the parts diagram to ensure you have a clear understanding of how everything works. Once you feel confident in your knowledge of the different parts, you’re ready to move on to the next step of connecting your Sun Joe pressure washer.

Identify the High-Pressure Hose

In order to safely and effectively use a pressure washer, it’s important to familiarize yourself with the various parts of the machine. One key component is the high-pressure hose. This hose is responsible for carrying the pressurized water from the machine to the nozzle.

It is typically made of durable materials such as reinforced rubber or PVC, designed to withstand the high pressure generated by the machine. The high-pressure hose is usually connected to the pressure washer via a threaded coupling or quick-connect fitting. It is important to ensure that the hose is securely attached to the machine to prevent any leaks or accidents.

Familiarizing yourself with the high-pressure hose and its connection points will allow you to use your pressure washer safely and efficiently.

Locate the Spray Gun and Wand

pressure washer, spray gun, wand. When using a pressure washer, it’s essential to familiarize yourself with the different parts of the machine to ensure you can operate it safely and efficiently. One of the crucial components of a pressure washer is the spray gun and wand.

These two items work together to deliver a powerful stream of water that can remove dirt, grime, and stains from various surfaces. The spray gun is the handheld device that you grip and control. It has a trigger that you squeeze to activate the water flow.

The wand, on the other hand, is the long extension that connects to the spray gun. It allows you to reach distant or high areas without straining yourself. Together, the spray gun and wand are the primary tools you’ll use to direct the pressurized water to the desired surfaces.

They are typically made of durable materials like metal or plastic to withstand the high water pressure. So, as you begin your pressure washing journey, make sure you locate and familiarize yourself with the spray gun and wand – your trusty partners in keeping your surroundings clean and spotless.

Find the Detergent Tank (if applicable)

pressure washer, detergent tank

Step 2: Prepare the Pressure Washer for Connection

So, you’ve just purchased a Sun Joe pressure washer and you’re eager to see its powerful cleaning abilities in action. The first step in harnessing the power of your new pressure washer is to connect it properly. This may seem a bit overwhelming at first, but fear not! Connecting a Sun Joe pressure washer is a fairly simple process.

Start by locating the water hose adapter on the pressure washer unit. This is where you’ll attach the garden hose. Make sure to firmly connect the threaded end of the garden hose to the adapter, ensuring a tight seal.

Once you’ve connected the garden hose, it’s time to attach the high-pressure hose. This hose is usually color-coded and has a quick-connect coupler at one end. Simply line up the coupler with the corresponding fitting on the pressure washer unit and push it in until it clicks securely into place.

Now that you’ve connected both the garden hose and high-pressure hose, you’re ready to unleash the cleaning power of your Sun Joe pressure washer!

Check the Water Source

pressure washer, water source, connection

Inspect the Inlet Valve

In the world of pressure washers, the inlet valve sits at the heart of the machine, responsible for allowing water to flow into the unit. Before you can start using your pressure washer, you must first inspect this vital component and ensure that it is in good working condition. This step is essential because any issues with the inlet valve can hinder water flow and affect the overall performance of the machine.

So, how do you go about preparing the pressure washer for connection? First, start by locating the inlet valve. It is usually located near the bottom of the pressure washer, and it is where you will connect the water hose. Give it a quick visual inspection to check for any obvious signs of damage or dirt buildup.

If you notice any cracks, breaks, or clogs, you will need to address these issues first before proceeding. Next, you will want to clean the inlet valve to ensure that it is free from any debris or blockages. The easiest way to do this is to use an old toothbrush or a small brush to gently scrub away any dirt or debris that may have accumulated.

Be thorough in your cleaning, making sure to remove any stubborn buildup. Once you have cleaned the inlet valve, it’s time to connect the water hose. Make sure the hose is securely attached to the inlet valve and that there are no leaks.

This will help ensure a steady and consistent water flow while using the pressure washer. By taking the time to inspect and prepare the inlet valve, you are setting yourself up for success when using your pressure washer. A properly functioning inlet valve means proper water flow and optimal performance.

So, don’t overlook this important step and enjoy a hassle-free pressure washing experience.

Ensure the Pressure Washer is in the Off Position

When it comes to using a pressure washer, safety should always be a top priority. Before connecting the pressure washer to any water source, it is crucial to ensure that the machine is in the off position. This means that the power switch should be in the “off” or “zero” position to prevent any accidental water spray or injury.

Taking this simple step will help keep you and those around you safe while preparing the pressure washer for use. So, before moving on to the next step of connecting the machine, double-check that it is completely turned off. It’s better to be safe than sorry!

Step 3: Connect the High-Pressure Hose

Alright, it’s time to move on to step 3 of getting your Sun Joe pressure washer set up and ready to go! This step involves connecting the high-pressure hose to your pressure washer unit. Now, the high-pressure hose is the key component that allows the water to flow from the unit to the nozzle at a high pressure, so it’s important to make sure it’s properly connected. To begin, locate the connection point on your pressure washer unit.

This is usually found at the rear of the unit, and it will be clearly marked as the high-pressure hose connection. Once you’ve located this, take the end of the high-pressure hose that has the threaded connector and screw it onto the connection point on the unit. Make sure to turn it tightly, but be careful not to overtighten it, as this can cause damage to the threads.

Once it’s securely attached, you can move on to the other end of the hose. This end will have a connector that is designed to attach to the spray gun or wand. Simply screw this connector onto the spray gun or wand until it’s tight.

Again, be careful not to overtighten it. And there you have it! Your high-pressure hose is now connected to your Sun Joe pressure washer. Before you start using your pressure washer, it’s always a good idea to do a quick inspection of the hose to make sure there are no leaks or damage.

If you notice any issues, it’s best to replace the hose before starting any cleaning tasks. Now that you’ve got the high-pressure hose connected, you’re one step closer to getting your pressure washer up and running. Stay tuned for step 4, where we’ll cover how to connect the nozzles and start using your Sun Joe pressure washer to tackle those dirty surfaces!

Attach the Hose to the Pressure Washer Inlet

When it comes to connecting the high-pressure hose to your pressure washer, it’s important to follow the correct steps. Start by locating the pressure washer inlet, which is typically marked with a sticker or label. This is where you’ll attach the hose to ensure a secure connection.

Once you’ve found the inlet, take your high-pressure hose and match the threaded end with the inlet. Slide the hose onto the inlet and twist it clockwise until it is tight and secure. You want to make sure the hose is firmly attached so that it doesn’t come loose while you’re using the pressure washer.

Once the hose is connected, you’re ready to move on to the next step in using your pressure washer to tackle those outdoor cleaning tasks.

Tighten the Connection

tPressure washer, high-pressure hose, connect, tighten, steps

Connect the other End of the Hose to the Spray Gun

In step 3 of connecting your high-pressure hose, it’s time to attach the other end of the hose to the spray gun. This is a crucial step in the setup process, as it ensures that the water or cleaning solution will be properly delivered to the spray gun for effective use. To do this, you’ll want to locate the connection point on the spray gun where the hose will attach.

It’s usually a threaded connection that you can screw the hose onto. Make sure to tighten the connection securely, but be careful not to overtighten and risk damaging the threads. Once the hose is connected to the spray gun, it’s important to double-check the connection to ensure it is sealed properly.

Any leaks or loose connections could result in reduced pressure and decreased efficiency. One way to test the connection is to turn on the water supply and check for any water dripping or spraying out from the connection point. If you notice any leaks, try tightening the connection further or consider using a sealant to ensure a proper seal.

Now that the high-pressure hose is securely connected to the spray gun, you’re one step closer to getting your cleaning or water blasting job done. Remember to always follow the manufacturer’s instructions and safety precautions when using high-pressure equipment. With a properly connected hose, you’ll be able to tackle tasks with confidence, knowing that you have a reliable and efficient setup.

So go ahead, connect that hose, and get ready to take on any cleaning challenge!

Step 4: Connect the Spray Gun and Wand

So, you’ve got your Sun Joe pressure washer all set up, and now it’s time to connect the spray gun and wand. This step is crucial for getting the cleaning power you need for your outdoor projects. Here’s a simple guide on how to connect the spray gun and wand to your Sun Joe pressure washer.

First, locate the spray gun and wand. The spray gun is the handheld device that you will hold while using the pressure washer, and the wand is the long tube that connects to the spray gun and directs the water flow. Next, you’ll want to find the hose connection on the spray gun.

This is usually located at the bottom of the gun, and it will have a threaded collar that you can unscrew. Once you’ve located it, you can attach the threaded end of the wand to the hose connection on the spray gun. Make sure it is threaded on securely, but be careful not to over-tighten it.

Once you’ve connected the wand to the spray gun, you’ll want to make sure the wand is securely attached to the pressure washer. Most Sun Joe pressure washers will have a connection point specifically designed for the wand. Simply slide the wand into the connection point until it clicks into place.

Give it a little tug to make sure it’s securely attached. Now that you have the spray gun and wand connected, you’re ready to start using your Sun Joe pressure washer. Just make sure you have the proper attachments and settings for your cleaning task, and you’ll be able to tackle any outdoor project with ease.

In conclusion, connecting the spray gun and wand to your Sun Joe pressure washer is a simple process that can greatly enhance the cleaning power of your machine. By following these steps, you’ll be able to connect them securely and get started on your outdoor projects in no time. So go ahead, give it a try and see the difference it makes in your cleaning routine.

Insert the Wand into the Spray Gun

In Step 4 of our guide on how to use a paint sprayer, we come to the important task of connecting the spray gun and wand. This is a crucial step as it enables you to have better control over the paint flow and direction. Start by inserting the wand into the spray gun, making sure it fits snugly into place.

Once inserted, secure it tightly to ensure it doesn’t come loose during use. Think of this step as connecting the hand to the paint sprayer – just like how our hand controls the direction and flow of a brush, the wand allows you to do the same with the spray gun. Without this connection, your paint sprayer won’t be fully functional.

So take your time to ensure it’s properly connected before moving on to the next step.

Secure the Connection

secure the connection, connect the spray gun and wand

Step 5: Connect the Detergent Tank (if applicable)

Once you’ve got your Sun Joe pressure washer all set up and ready to go, it’s time to connect the detergent tank, if your model has one. Connecting the detergent tank allows you to easily apply soap or cleaning solutions to your surfaces for an extra deep clean. To get started, locate the detergent tank on your pressure washer.

It is usually located near the handle or on the top of the unit. Once you’ve found it, make sure the tank is empty before connecting it. Next, look for the detergent nozzle on your pressure washer.

This is typically a separate nozzle that is specifically designed for applying soap or cleaning solutions. Attach the detergent nozzle to the end of your pressure washer wand or gun. Now it’s time to connect the detergent tank.

Take the detergent tank and locate the inlet on the pressure washer. This is usually labeled with “detergent” or a similar indicator. Align the tank’s outlet with the inlet and push it in until it locks into place.

Once the detergent tank is securely connected, you can fill it with your preferred soap or cleaning solution. Make sure to use a detergent that is compatible with your pressure washer and suitable for the surface you are cleaning. Now you’re ready to start using the detergent tank! When you’re ready to apply soap, simply squeeze the trigger on your pressure washer gun or wand.

This will activate the detergent flow and mix it with the water stream. Be sure to follow the instructions on the detergent container for the recommended amount to use. Using a detergent tank with your Sun Joe pressure washer can make your cleaning tasks even more effective and efficient.

Open the Detergent Tank Cap

detergent tank cap, connect detergent tank

Attach the Detergent Tank to the Pressure Washer

pressure washer, detergent tank, connect, attach. So you’ve got your pressure washer all set up and ready to go, but what about that detergent tank? If your pressure washer comes with a detergent tank, it’s a great addition to help you tackle those tough cleaning jobs. Connecting the detergent tank is actually quite simple.

First, locate the detergent tank on your pressure washer. It is usually a separate compartment or container attached to the main unit. Next, take the hose that is connected to the detergent tank and attach it to the designated port on the pressure washer.

This is typically a threaded connection that you will need to screw in securely. Make sure it is tightened properly to avoid any leaks. Once the hose is connected, you can fill the detergent tank with your cleaning solution of choice.

Be sure to follow the instructions on the detergent bottle for the correct dilution ratio. Once the tank is filled, you’re ready to get cleaning! Simply adjust the pressure washer nozzle to the desired setting for applying detergent, and you’re good to go. Just remember to rinse off any residue thoroughly when you’re done to avoid any build-up or damage.

With the detergent tank attached to your pressure washer, you’ll have the power to tackle even the toughest dirt and grime.

Step 6: Test the Connection

So you’ve got your new Sun Joe pressure washer and now you’re ready to connect it and start tackling those dirty surfaces. Connecting a Sun Joe pressure washer is actually quite simple. First, make sure that you have all the necessary components, including the pressure washer itself, the spray gun, and the hose.

Begin by attaching the spray gun to the end of the hose. This is usually done by screwing the two pieces together tightly. Next, you’ll want to connect the hose to the pressure washer.

Look for the hose intake on the pressure washer, which is typically located on the front or side. Insert the end of the hose into the intake and twist it clockwise to secure it in place. Once you have the hose connected, it’s time to turn on the pressure washer and test the connection.

Before you do so, make sure that the water supply is turned on and flowing properly. Then, simply press the trigger on the spray gun to release the water. If the water flows smoothly and there are no leaks, then congratulations! You’ve successfully connected your Sun Joe pressure washer and you’re ready to begin your cleaning tasks.

Turn on the Water Source

In the final step of installing a water connection, it’s time to turn on the water source and test the connection. This is an exciting moment as it means you’re almost done and soon you’ll have a functioning water system in place. Before you turn on the water source, make sure all the valves are closed to prevent any potential leaks.

Once everything is secure, slowly open the main water valve and listen for any signs of water flow. You can also check for any leaks or drips around the connection points. It’s important to do this step carefully to avoid any surprises or water damage.

Once you’re confident that the connection is secure and there are no leaks, you can fully open the water source and enjoy the fruits of your labor. So go ahead, turn on that water source and see the water flow through your newly installed connection!

Squeeze the Spray Gun Trigger to Release Built-up Air

In the exciting world of painting, it’s important to have a solid connection between your spray gun and air compressor. This connection ensures that the paint flows smoothly and evenly, giving you a professional finish. So, how do you test this connection? Step 6 is all about putting it to the test.

Once your spray gun is connected to the air compressor, you’ll want to squeeze the trigger to release any built-up air. This step helps to prevent any sputtering or splattering when you start spraying. Plus, it gives you a chance to get a feel for the trigger and the pressure of the air coming out.

As you squeeze the trigger, you should hear a steady flow of air. If there are any leaks or issues with the connection, now is the time to address them. It’s always a good idea to have a backup connection or spare parts on hand, just in case.

And remember, practice makes perfect. So, take your time and trust your instincts as you test the connection and prepare to unleash your creativity on that blank canvas.

Check for Leaks

plumbing leaks

Conclusion

And there you have it, my friends, the ultimate guide on how to connect your Sun Joe pressure washer! With these simple steps, you’ll be cleaning like a pro in no time. Just remember to stay safe, never aim the nozzle at anyone or any pet, and always wear protective gear. So go ahead, unleash the power of the sun and watch those dirt and grime stains disappear! And who knows, maybe you’ll even find a new appreciation for the sun’s cleaning abilities.

Happy washing, my friends!”

Enjoy Your Newly Connected Sun Joe Pressure Washer

cay you need to assure that your Sun Joe pressure washer is properly connected before starting any cleaning tasks. In Step 6 of the connection process, it is crucial to test the connection to ensure that everything is working smoothly. To do this, you can perform a simple test by turning on the pressure washer and checking if water is coming out from the nozzle.

Start by making sure that the water source is connected to the pressure washer and turned on. Then, plug in the power cord and turn on the switch. Once the pressure washer is powered on, squeeze the trigger on the spray gun to release the water.

You should hear the motor of the pressure washer start working, and water should start flowing from the nozzle. Make sure to have a bucket or a drain nearby to catch the water as it flows out. If you notice any issues during this test, such as no water flowing or an unusual noise coming from the pressure washer, it could indicate a problem with the connection.

In this case, double-check that all the connections are secure and try again. If the issue persists, it may be necessary to consult the user manual or contact customer support for further assistance. By testing the connection of your Sun Joe pressure washer, you can ensure that it is ready for use and avoid any potential issues during your cleaning tasks.

So, take a moment to perform this simple test and enjoy the satisfaction of seeing your pressure washer in action.

Proper Maintenance and Cleaning Tips

In the previous steps, we’ve covered the importance of properly maintaining and cleaning your devices to ensure optimal performance and longevity. Now, it’s time to move on to step 6: testing the connection. This step is crucial as it allows you to determine whether your device is functioning correctly and connected to the desired network.

To test the connection, start by checking the signal strength on your device. Ensure that you are within range of your Wi-Fi router or cellular network. If the signal is weak, try moving closer to the router or finding a better spot where the signal is stronger.

Next, try accessing the internet or any online services that require an internet connection. Open a web browser and visit a few websites to see if they load properly. You can also try streaming a video or downloading a file to check the speed and stability of the connection.

If everything seems to be working fine, congratulations! Your device is successfully connected. However, if you encounter any issues like slow or unstable connection, it’s time to troubleshoot. Start by restarting your device and the router or modem.

Sometimes, a simple restart can fix connection problems. If that doesn’t work, check for any updates for your device’s software or firmware. Keeping your device up to date can resolve compatibility issues and improve performance.

If the problem persists, try disconnecting and reconnecting to the network. Sometimes, a temporary glitch can disrupt the connection, and reconnecting can solve the issue. If none of these steps work, it may be time to contact your internet service provider or consult a professional for further assistance.

FAQs

**FAQs about How to Connect Sun Joe Pressure Washer:** 1. **How do I connect the water supply to my Sun Joe pressure washer?** To connect the water supply to your Sun Joe pressure washer, simply attach one end of a garden hose to the water inlet on the pressure washer and the other end to a water source, such as an outdoor spigot. Make sure to turn on the water source before starting the pressure washer. 2. **What type of detergent should I use with my Sun Joe pressure washer?** Sun Joe recommends using their eco-friendly, biodegradable pressure washer detergents for optimal performance and to protect the environment. These detergents are specially formulated for use with their pressure washers and can be purchased separately. 3. **How do I connect the high-pressure hose to my Sun Joe pressure washer?** To connect the high-pressure hose to your Sun Joe pressure washer, first make sure the pressure washer is turned off and the trigger gun is released. Then, simply screw one end of the high-pressure hose onto the water outlet on the pressure washer and the other end onto the trigger gun. Make sure the connections are tight to avoid leaks. 4. **Can I use an extension cord with my Sun Joe pressure washer?** Sun Joe recommends using the pressure washer’s power cord directly into a grounded electrical outlet for safety and optimal performance. Using an extension cord may reduce the power output and can potentially damage the pressure washer. If necessary, use a heavy-duty extension cord that is rated for outdoor use and has the appropriate amperage. 5. **What is the maximum length of the high-pressure hose that can be used with a Sun Joe pressure washer?** Sun Joe recommends using their high-pressure hose that comes with the pressure washer or a replacement hose that is a maximum of 25 feet in length. Using a longer hose can result in a drop in water pressure and affect the performance of the pressure washer. 6. **How do I connect the spray wand to my Sun Joe pressure washer?** To connect the spray wand to your Sun Joe pressure washer, simply push the quick-connect nozzle onto the end of the spray wand until it clicks into place. Make sure it is secure before starting the pressure washer. To disconnect, push the quick-connect collar back and pull the nozzle off. 7. **What is the recommended maintenance for my Sun Joe pressure washer?** To keep your Sun Joe pressure washer in optimal condition, it is recommended to flush the system with clean water after each use, especially if using detergent. Periodically, check the water inlet filter and clean if necessary. Store the pressure washer in a dry place, protected from freezing temperatures. Refer to the user manual for specific maintenance guidelines. 8. **How do I adjust the pressure on my Sun Joe pressure washer?** Sun Joe pressure washers typically have a pressure adjustment knob or dial that allows you to increase or decrease the pressure output. Consult the user manual for your specific model to locate and adjust the pressure accordingly. 9. **Can I use hot water with my Sun Joe pressure washer?** Sun Joe pressure washers are designed for use with cold water only. Using hot water can damage the internal components and void the warranty. It is recommended to use water from a cold water source only. 10. **What do I do if my Sun Joe pressure washer is not producing high pressure?** If your Sun Joe pressure washer is not producing high pressure, check if the nozzle is clogged or damaged and clean or replace it if necessary. Make sure the water supply is fully turned on and the hoses are connected properly. If the issue persists, contact Sun Joe customer support for further assistance. 11. **Can I use my Sun Joe pressure washer to clean my car?** Yes, you can use a Sun Joe pressure washer to clean your car. However, it is important to use the appropriate nozzle and choose a lower pressure setting to avoid damaging the car’s paint or windows. Sun Joe also offers a car-washing brush attachment specifically designed for use with their pressure washers. 12. **What safety precautions should I take when using my Sun Joe pressure washer?** When using a Sun Joe pressure washer, it is important to wear protective eyewear and closed-toe shoes. Avoid spraying the pressure washer directly at people, pets, or delicate surfaces. Never point the spray wand at electrical outlets, switches, or the pressure washer itself. Always read and follow the safety instructions in the user manual before operating the pressure washer.