How to Add Line to Craftsman Weed Eater: A Step-by-Step Guide for Easy Maintenance

If you own a Craftsman weed eater, you know how important it is to make sure it’s fed and ready for work. One key element of a well-functioning weed eater is its line. Not having enough line or having worn out line can lead to a frustrating and inefficient time spent tending to your yard.

But how do you add line to your Craftsman weed eater? It may seem like a daunting task, but we’ve got you covered. With just a few steps, you’ll be back to smoothly tackling those lawn chores in no time. Let’s dive in and add some line to your Craftsman weed eater.

What You Will Need:

If you’re wondering how to add line to your Craftsman weed eater, you’ll be glad to know that the process is not as complicated as you might think. To get started, you’ll need a few things. First, you’ll need a replacement line that is appropriate for your weed eater model.

Make sure to check the user manual or the manufacturer’s website to ensure that you have the correct size and type of line. You’ll also need some safety gear, including gloves and protective eyewear. Additionally, you’ll need a flat surface to work on and a clean workspace with plenty of light.

Finally, you’ll need some basic tools, such as pliers or wire cutters, to remove the old line and install the new one. With these things in hand, you’ll be ready to start working on your Craftsman weed eater. Let’s get started!

– Replacement trimmer line

If you are tired of constantly replacing your trimmer line, it’s time to get a new one. To replace your trimmer line, you will need a few things. First, you will need the right size line for your trimmer.

Check your owner’s manual if you are unsure of the size you need. You will also need a pair of scissors or a utility knife to cut the line to the right length. Once you have your line and cutting tool, it’s time to replace your old trimmer line.

Start by unplugging your trimmer or removing its battery. Then, carefully remove the old trimmer line from the spool. Use caution as the spool may be under pressure from the old line.

Cut your new trimmer line to the appropriate length and insert it into the spool, following the manufacturer’s instructions. Once you have inserted the line, wind it onto the spool, being careful not to cross the lines. Finally, secure the spool back onto the trimmer head and you’re done! Remember, using the right size and type of trimmer line is crucial for optimal performance.

The most commonly used trimmer line material is nylon, but you can also find lines made of other materials such as metal or twisted wire. Be sure to choose the best type for your trimming needs. With the right tools and a little know-how, you can easily replace your trimmer line and keep your yard looking great all season long.

– Clean cloth or rag

When it comes to cleaning, having the right tools makes all the difference. If you’re looking to tackle a mess, you’ll need a few things to get started. One essential item is a clean cloth or rag.

Whether you’re wiping down countertops, polishing surfaces, or cleaning up spills, a cloth or rag is a versatile tool that can help you get the job done. The best cloth or rag for the task will depend on what you’re cleaning and what materials you’re working with. For example, a microfiber cloth works well for dusting and cleaning electronic screens, while a cotton rag might be better for cleaning up liquids.

Whatever type of cloth or rag you choose, make sure it’s clean and free of any debris or dirt. A dirty rag will only make your cleaning job harder and could even spread germs or bacteria around your home. So, next time you’re getting ready to clean, don’t forget to grab a clean cloth or rag to help you tackle the mess.

– A pair of gloves (optional)

If you’re planning to go out in cold weather, there are a few essential items that you’ll need to keep yourself warm and comfortable. One of those items is a pair of gloves, although they are optional. Gloves help to keep your hands warm and reduce the risk of frostbite.

If you’ll be outside for an extended period of time, gloves are highly recommended. Make sure to select gloves made from warm, breathable materials that will keep your hands dry. A good pair of gloves should be comfortable, easy to wear, and provide a good grip.

Some gloves even come with touch screen compatibility, keeping your hands warm without sacrificing the ability to use your phone. When selecting gloves, consider the type of activity you’ll be doing, as well as your hand size and any other needs you may have. Overall, gloves are a great addition to your cold weather gear, keeping your hands protected and comfortable as you go about your day.

Step 1: Turn Off the Weed Eater

Adding line to a Craftsman weed eater can be a bit tricky, but with some guidance, it is easy to do. The first step is to turn off the weed eater to prevent any accidental injuries. Next, you need to remove the spool cover by pressing the tabs on either side.

Once the cover is removed, take out the spool and clean it with a cloth to remove any debris. After that, cut a length of replacement line and feed it through the eyelets on the spool. Secure the ends of the line in the notches provided on the spool and wind the line in the direction indicated on the spool.

Once you have wound enough line, insert the spool back into the housing, making sure that the line feeds out through the holes in the housing. Finally, replace the spool cover and lock it in place, and you’re done! By following these steps, you should have no problem adding line to your Craftsman weed eater and keeping it running smoothly for your next yard work.

– Make sure the weed eater is turned off and cooled down

When it comes to using a weed eater, it’s essential that you make sure the device is turned off and sufficiently cooled down before doing anything else. This is a step that you cannot afford to skip as it ensures your safety while working with the equipment. If the weed eater has only just been used, it’s likely to be hot and therefore may pose a fire hazard if you attempt to start working with it.

It’s important to wait until the device has sufficiently cooled down, and you can touch it without experiencing any burns. Once the weed eater is cool enough, you can then move onto the next step of getting started with your yard work. Remember, safety comes first, and by ensuring the weed eater is turned off and cooled down, you can help prevent any potential accidents.

Step 2: Remove the Spool Cover

Now that you have located the spool, it’s time to remove the spool cover. This is a vital step when it comes to adding a line to your Craftsman weed eater. You will need to unscrew the spool cover, which is typically found at the bottom of the spool.

However, before you do so, make sure that the weed eater is turned off and that you’re wearing protective gloves. Once the spool cover is removed, set it aside in a safe place. You don’t want to misplace it or accidentally damage it.

With the spool cover off, you’ll be able to access the spool and begin the process of loading the line. Remember that adding line to your weed eater is essential for maintaining its performance and keeping your lawn looking great.

– Use the clean cloth to wipe away any dirt or debris from the spool cover

Removing the spool cover is a crucial step in preparing your garden tool for use. The spool cover is the part of your tool that contains the cutting line and protects it from getting tangled or caught. Before you remove the spool cover, you need to ensure that it is clean and free of debris.

Use a clean cloth to wipe away any dirt or debris that may have accumulated on the cover. Make sure you get into the crevices and tight spaces, so there’s no chance of dirt getting into the cutting line. Once you’ve cleaned the spool cover, locate the release button that will allow you to remove it.

Depending on the brand and model of your garden tool, the release button may be located in different areas. Once you have located it, press down on the release button and gently pull the spool cover off. Remember to handle the spool cover with care to avoid damaging the cutting line or any other parts of your garden tool.

Removing the spool cover will allow you to access the cutting line and make any necessary adjustments or replacements. So, ensure that you clean it properly before removing it to keep your garden tool running smoothly.

– Locate the release button or tab on the spool cover and press or slide it

Removing the spool cover from a gardening tool might seem troublesome, but it’s actually a quite simple process. The second step to do so is to locate the release button or tab on the spool cover and press or slide it. This should be an easy task, but sometimes these buttons or tabs can be hard to find.

Be sure to check around the perimeter of the spool cover carefully. Usually, there’s a small button or tab that you can press or slide to loosen and remove the spool cover. It’s important to note that the location of the release button or tab can vary from tool to tool.

So, if you have any difficultly finding it, check your gardening tool’s instruction manual on how to remove the spool cover. It’s also important to proceed with caution when removing the spool cover as it may contain a sharp cutting line that can be hazardous to your fingers. Always wear gloves or use a suitable tool to avoid any injuries.

In conclusion, don’t get intimidated by the task of removing a spool cover from your gardening tool. It’s a simple process if you follow the steps provided in the manual. Step two involves locating the release button or tab and carefully pressing or sliding it to detach the cover.

It’s always best to proceed with caution and remember to wear gloves or use a suitable tool to avoid any injuries. With these tips, you’re sure to remove the spool cover confidently and safely.

– Lift the spool cover off the weed eater

When it comes to weed eater maintenance, removing the spool cover is a critical step to accessing the spool and trimming line. It’s a relatively simple task, but it may require a bit of force. Start by locating the spool cover, which can typically be found at the bottom of the weed eater near the cutting head.

The cover may be labeled with an arrow indicating its direction of rotation. Once you’ve located the spool cover, lift it off the weed eater. Depending on the model, the cover may have clips or tabs that need to be pressed down to release the cover.

If the spool cover seems stuck, don’t be afraid to use a bit of force, but be careful not to break the cover. With the spool cover removed, you can now access the spool and replace the old line with a new one. Regular maintenance, such as changing the trimming line, can help ensure your weed eater stays in good working condition.

So, don’t skip this important step and keep your equipment running like new.

Step 3: Remove the Spool

Now that you’ve prepared the line and spool, it’s time to remove the old spool from your Craftsman weed eater. Start by locating the spool cover and pressing its tabs to release it. You can then lift the cover off and remove any leftover line from the spool.

Next, look for the spool retainer knob and turn it counterclockwise to release the spool. Take care not to lose any of the parts as you remove the spool. Once the spool is off, you can begin to add the new line and reassemble your weed eater.

Remember, every model may vary slightly when it comes to removing the spool, so refer to your user manual for specific instructions. With the old spool off, you’re almost ready to get back to trimming your lawn with a freshly spooled Craftsman weed eater!

– Carefully remove the spool from the weed eater

Removing the spool from your weed eater can be a bit tricky, but don’t worry – I’ve got you covered! First things first, always make sure your weed eater is turned off and disconnected from its power source. Then, locate the spool on the bottom of your weed eater. You’ll notice it has two small tabs on either side of the spool that hold it in place.

To remove the spool, press down on these tabs and carefully pull the spool straight out. There may be some resistance, but try not to force it. When the spool is out, be sure to set it aside in a safe place so that it doesn’t become damaged.

This step is crucial because damaged or broken spools can cause your weed eater to malfunction and become dangerous. So, take your time, and be gentle when removing and storing your spool. You got this!

Step 4: Prepare the Replacement Line

Now that you have cut the proper length of replacement line to fit your Craftsman weed eater, it’s time to prepare it for installation. The first thing you want to do is take a look at the cutting head and locate the notches on either side. These notches are where you’ll insert the line once it’s ready.

Next, you’ll need to unravel the replacement line and straighten out any kinks or tangles. Make sure to unspool enough line to fill both notches on the cutting head. Once you have untangled the line, cut the ends at a 45-degree angle to make it easier to insert into the notches.

Now that your replacement line is properly prepared, you’re ready to move on to the final step of installing it onto your Craftsman weed eater.

– Wear gloves if desired to protect your hands

Now that you have removed the old trimmer line, it’s time to prepare the replacement line. First things first, ensure that you have the correct type and size of trimmer line for your machine. You can check your user manual or ask a professional if you’re unsure.

Next, wear gloves if desired to protect your hands from any accidental cuts or abrasions. Then, straighten out the replacement line to remove any kinks or bends. This is important as it ensures that the line feeds smoothly and gives a clean, even cut.

Finally, trim the line to the desired length, being mindful of leaving enough length to work with, but not too much that it gets tangled or causes the line to jam. By following these steps, you’ll be well on your way to a successful replacement line installation.

– Measure and cut the replacement line to the appropriate length

Before you can replace the line on your weed wacker, you’ll need to measure and cut the new line to the appropriate length. It’s important to have the right length to ensure optimal cutting performance and to prevent any potential damage to your equipment. To start, gather your replacement line and a measuring tool.

Take your old line off of the spool and untangle it to get an accurate measurement. Once you have the measurement, use your cutting tool to cut the new line to the same length. Keep in mind that different models may require different lengths, so it’s always a good idea to consult your user’s manual to determine the exact length you need.

With your replacement line measured and cut, you’re one step closer to a perfectly trimmed lawn.

Step 5: Insert the Replacement Line

Now that you have removed the old line from your Craftsman weed eater, it’s time to insert the replacement line. Take your replacement line, and feed one end into the first hole in the spool. Push the line in and wind it around the spool in the direction indicated by the arrow.

Continue winding until the spool is almost full, but be sure to leave enough room for the cover to fit back on. Once you have wound all the line, feed the other end into the remaining hole on the spool. Place the spool back into the weed eater’s head and align any notches or arrows to ensure it is in place.

Finally, replace the head cover and twist it to secure it in place. Congratulations, you have successfully replaced the line on your Craftsman weed eater!

– Look for the arrows on the spool to indicate the direction of winding

When it comes to replacing the line on your trimmer spool, it’s essential to pay attention to the direction of winding. Most spools come with arrows that show which direction the line should be wound. When you have found the right direction, insert the replacement line into the spool’s upper part, starting from the spool’s center.

Wind the line around the spool’s flanges evenly, leaving enough space to secure the end of the line. Tuck the line into the slots as indicated, ensuring that it doesn’t get twisted or tangled. Once you’re done winding, secure the end of the line into the slot provided to lock it into place.

Your trimmer spool should be ready to go, and you can start trimming your lawn and garden with ease. Remember, replacing the line on your trimmer spool can be a bit tricky, but with some practice, you should be able to get it done in no time. Always consult your operator’s manual or manufacturer’s website for specific instructions before beginning the replacement process.

With the right tools and a bit of patience, you can ensure that your trimmer is always ready for action, and you can keep your lawn and garden looking neat and tidy all year round!

– Wind the line around the spool in the direction indicated by the arrows

When replacing the line on your spool, it’s important to wind the line in the correct direction. To do this, simply follow the arrows on the spool. Once you have wound the line correctly, it’s time to insert the replacement line.

First, find the hole on the side of the spool and insert the line through it. Then, pull the line through until there is an even amount on both sides of the spool. Make sure to leave enough line so that you can trim it later if necessary.

Once you have pulled the line through, you can then start to wind it onto the spool. Be careful not to overlap the line, as this can cause tangles and jams. While it may seem like a daunting task, winding the line onto the spool can be quite easy with a little practice.

It’s important to make sure that the line is evenly wound and not overlapping, as this can cause tangles and jams. By taking the time to wind the line correctly, you can ensure that your spool will work properly and provide you with the best performance possible. So be sure to follow the arrows on the spool, insert the line correctly, and wind it evenly.

With these simple steps, you’ll have a properly wound spool in no time at all.

– Leave a few inches of line unwound at the end

When it comes to replacing the line on your trimmer, inserting the new line can be a bit tricky. But fear not, it’s actually quite simple as long as you follow the right steps. The fifth step involves inserting the replacement line into the spool.

First, find the hole located in the spool’s center and insert one end of the line, securing it in place. Next, wind the line around the spool in the direction indicated in the trimmer’s user manual, ensuring that the line is evenly spaced and does not overlap. Leave a few inches of line unwound at the end to prevent it from unraveling.

Finally, insert the other end of the line into the remaining hole on the spool and snap it back into place. And voila, you’re all set to go out and tackle those overgrown weeds! By following these simple steps, you’ll be able to quickly and easily replace the line on your trimmer and continue with your yard work without any interruptions.

Step 6: Reinsert the Spool

Once the line has been properly cut and measured, it’s time to reinsert the spool into the Craftsman weed eater. First, make sure the spool is clean and free of debris. Then, hold the spool with one hand while aligning the line with the slots on the spool.

Carefully thread the line through the holes, making sure it is snugly in place. As you do this, make sure that the line is wound in the correct direction, as indicated by the arrows on the spool. Once the line is in place, gently replace the spool into the housing, taking care not to damage the line as you do so.

Ensure the spool is firmly seated in the housing and replace the cover, making sure all clips or screws are securely fastened. And just like that, your Craftsman weed eater is ready to use!

– Carefully place the spool back into the weed eater

Now that you’ve wound your weed eater spool with new trimmer line, it’s time to reinsert it carefully. Before inserting the spool, ensure that the weed eater is switched off and unplugged to avoid any accidents. Begin by locating the spool cap and removing it by turning it clockwise or counterclockwise depending on your weed eater model.

Next, carefully lift the spool out of the weed eater and ensure that you don’t lose any of the line you wound around it. The trickiest part of reinserting the spool is to ensure that the line is lined up properly and that it is inserted into the eyelets. It is best to inspect the spool and check the manufacturer’s instructions to ensure that you are placing the spool in correctly.

Once you are sure that the spool is in the correct orientation, carefully place it back into the weed eater, ensuring that it snaps back into place. Remember to tighten the spool cap, and you are now ready to trim your lawn to perfection. By following these simple steps, you should be able to change the line in your weed eater with ease whenever the need arises.

– Make sure it is securely in place

After cleaning and untangling the trimmer line, we come to the crucial step of reinserting the spool. This is a vital step that you shouldn’t overlook if you want to get the best out of your tool. First off, ensure that the line is wound tightly and neatly around the spool.

Avoid overlapping or crossing over the lines as they could tangle up during operation. Once you have wound it correctly, slip the spool back into the head, lining up the holes on the spool with the eyelets on the trimmer head. Make sure it clicks into place, and gently tug on the line to make sure it is securely in position.

This step is essential to prevent the spool from slipping or popping out of its position as you work. With the spool safely in place, you are now ready to clip away to your heart’s content.

Step 7: Replace the Spool Cover

If you’re wondering how to add line to your Craftsman weed eater, then it’s important to know the steps involved. Once you’ve taken apart the spool, added the line, and wound it correctly, you’re ready to replace the spool cover. This final step is simple but important, as it helps keep the line in place and prevents tangles and jams while you’re using your weed eater.

To replace the spool cover, simply align it with the spool so that the tabs and slots match up, then press it firmly in place until you hear a click. Make sure the cover is securely fastened before using your weed eater again. By following these simple steps, you can easily add line to your Craftsman weed eater and keep your yard looking tidy and well-maintained.

– Place the spool cover back over the spool and weed eater

Now that you have successfully installed the new spool, it’s time to put the spool cover back over the spool. This cover plays an essential role in protecting the spool and other internal components from dust and debris. Make sure you align the cover correctly and push it down firmly until it snaps into place.

A loose cover can result in the spool flying out during operation, which can be dangerous. If you are unsure whether the cover is secure, give it a light tug to ensure that it stays put. Remember, the spool cover is a vital part of your weed eater, so don’t neglect to put it back on.

As with any machine, it’s essential to maintain your weed eater regularly to keep it functioning correctly. Changing the spool is just one aspect of this upkeep, but it’s a crucial one. By following these simple steps, you can quickly and easily install a new spool and keep your weed eater running smoothly.

So, get out there and start trimming those weeds and grass like a pro!

– Push or slide the tab or button until it clicks into place

Congratulations! You’re on the last step of replacing your spool cover. This step entails pushing or sliding the tab or button until it clicks into place. This click confirms that you have successfully replaced your spool cover, and your string trimmer is ready to use.

Now, it’s vital to ensure that your spool cover is correctly fitted. Check if it’s flush with the trimmer head. If not, slide it forward or backward until it snaps into place firmly.

This will prevent the spool cover from coming loose during operation, which can lead to accidents. Always make sure that the cover is tightly fixed before using your string trimmer. Loose covers can lead to an accumulation of debris inside the spool housing, making it difficult to remove later.

Additionally, a loose cover can cause damage to your trimmer head, which may require costly repairs. To keep your string trimmer in excellent condition, it is advisable to inspect it regularly. Check your spool cover for signs of wear and tear or any damage from time to time.

If such is the case, it’s a signal that you need to replace your cover. In conclusion, replacing a spool cover is a simple process that shouldn’t take too much of your time. Follow all the necessary steps, and you’ll have your machine up and running in no time.

Don’t forget to maintain your string trimmer regularly, and you’ll enjoy long-lasting use.

Step 8: Test the Weed Eater

After adding the line to your Craftsman weed eater, it’s important to test it before using it to ensure it’s working properly. Engage the throttle and listen for any unusual sounds or vibrations. Make sure the line is feeding smoothly and is the proper length for your intended use.

If you notice any issues, turn off the weed eater and take a closer look at the line and spool to ensure they are installed correctly. It may take a few attempts to get the line feeding smoothly, but once you have it dialed in, you’ll be ready to tackle your outdoor lawn care tasks. Don’t forget to wear appropriate safety gear while operating any power equipment, including eye and ear protection.

With a little care and maintenance, your Craftsman weed eater will be a reliable and efficient tool for years to come.

– Turn on the weed eater and test it to make sure the line is working correctly

After you have successfully installed the line on your weed eater, it’s time to test it to make sure it’s working correctly. Turning on the weed eater and testing the line is a crucial step that must not be overlooked. When you switch on the tool and notice that the line is detaching or shaking, you may need to re-examine your installation to ensure that the line is properly fitted.

Additionally, while testing your weed eater, you should confirm that it starts without any hiccups. If it declines to start, you may need to examine the fuel and oil ratio or whether the spark plug is correctly installed. Make sure you keep yourself safe while you are testing the weed eater.

Safety glasses, gloves, and closed-toe footwear are recommended. Overall, testing your weed eater guarantees that your tool is performing efficiently and will be ready to use the next time you need it.

The conclusion of any written work is the final opportunity to leave a lasting impression on your readers. It’s a chance to reiterate your main points, summarize your findings, and leave your audience with a sense of closure. But what makes a great conclusion? Is it simply restating your thesis statement, or is there more to it than that? In this blog post, we’ll explore the key elements of a powerful conclusion, and how to ensure that your final words pack a punch.

Whether you’re writing an academic paper, a business report, or a personal essay, the tips and techniques we’ll discuss are universally applicable. So, let’s dive in and discover what it takes to write a conclusion that truly resonates with your readers.

Maintaining Your Weed Eater’s Line is Simple

Are you struggling with maintaining the line on your Craftsman weed eater? Don’t worry, adding or replacing the line on a weed eater is a simple task that anyone can do. First, make sure you have the correct size line for your powerful equipment. Then, turn off the engine and unplug the spark plug to avoid any accidents.

Unlock the cap and carefully remove the empty spool from the head of the weed eater. Now you can wind the new line onto the spool, ensuring that the line is not overlapping and the spool is full. Finally, thread the line through the designated holes or notches on the head of the weed eater and lock it back into place.

Once you’ve completed these steps, you’ll have your Craftsman weed eater up and running in no time with a fresh line ready to tackle any job. With this simple process, you won’t have to worry about any difficulty in maintaining your weed eater’s line ever again.

– Regularly replacing your trimmer line will keep your weed eater running smoothly. With these simple steps, you’ll be back to trimming in no time!

Maintaining your weed eater’s line is an essential task to keep your tool running smoothly and effectively. Over time, the line on your trimmer wears down and becomes brittle, making it difficult to use. Regularly replacing your trimmer line is the best way to ensure that your weed eater works perfectly every time you need it.

It’s simple and easy to do, and it won’t take much of your time. Just follow a few steps, and you’ll be back to trimming in no time! First, make sure that your weed eater is turned off and unplugged. Then, remove any remaining line from the spool.

Next, cut a length of new line that is the same size and shape as the old one. Insert one end of the line into a hole on the spool. Wind the line around the spool until there is only a small amount left.

Then, cut the line with a pair of scissors or garden shears. Finally, place the spool back into the weed eater, and you’re ready to go. It’s like changing the oil in your car – simple, but necessary.

By doing this regularly, you’ll avoid frustrating tangles and jams, and you’ll save time and money in the long run by extending the life of your weed eater. In conclusion, replacing your weed eater’s line is vital to keep your tool in tip-top shape. So, don’t forget to maintain your equipment and reap the benefits of a well-running weed eater every time you need it!

Conclusion

In summary, adding a line to your Craftsman weed eater may seem like a daunting task, but with the right steps and a little bit of patience, it can be easily accomplished. Just remember to always wear safety gear, carefully follow the manufacturer’s instructions, and have a spare line handy. And who knows, with this knowledge under your belt, you may just become the envy of all your fellow gardeners and landscapers.

Happy trimming!”

FAQs

1. How do I properly install a new line on my Craftsman weed eater? A: First, remove any existing line. Then, insert the new line into the hole in the spool, and wind it in the direction indicated by the arrows. Finally, secure the line by threading it through the eyelets. 2. Why won’t my Craftsman weed eater start? A: There are a few potential reasons for this. First, check the spark plug and replace it if necessary. Also, make sure there is fuel in the tank and that the fuel filter is clean. Lastly, inspect the carburetor and clean or replace it as needed. 3. What is the proper technique for using a Craftsman weed eater? A: Keep the tool level and at a consistent height, and move it in a sweeping motion to cut through grass and weeds. Use the safety guard to protect yourself and others from flying debris. 4. How do I properly maintain my Craftsman weed eater? A: Regular maintenance includes cleaning the air filter, keeping the carburetor clean, and lubricating any moving parts. Also, ensure the fuel mixture is correct and the fuel filter is clean. 5. Why is my Craftsman weed eater smoking excessively? A: This can be caused by a few things, including a dirty air filter, a clogged spark arrestor, or a carburetor that needs to be cleaned. Check these components and clean or replace them as necessary. 6. How often should I replace the line on my Craftsman weed eater? A: This depends on your usage, but as a general rule, it’s recommended to replace the line after every 10 hours of use or at the start of each season. 7. How do I troubleshoot my Craftsman weed eater if it’s not working properly? A: Start by checking the spark plug, fuel mixture, and air filter. If those are all in good condition, inspect the carburetor and fuel lines for any issues. If you’re still having problems, it may be time to take it to a professional for repair.